PT Astra Honda Motor (AHM) officially launched the All New Honda Vario 160 some time ago.Different from the Vario 150, the Vario 160 gets various changes in all sectors.One thing that has changed is the engine area which now has a larger capacity, similar to the Honda PCX 160.Although it has a similar engine to the PCX 160, it turns out that some of the Vario 160 components have differences.The CVT area is one that is different.So, what is the difference between CVT PCX 160 and Vario 160?Reza Rezdie S as the Technical Service Division of AHM gave a complete explanation.Also Read: Marc Marquez Hopes MotoGP Jerez Will Be Easier, Why?The differences between the CVT components of the Honda Vario 160 and PCX 160 are found in the front and rear pulleys and the drive belt.These three sections have different sizes.Reza said the difference in the CVT area could not only be seen from the appearance.Because, the changes are actually given on the inside of the CVT component."If it's the same as PCX 160 physically, you may not see it. But the diameter of the front pulley and the diameter of the rear pulley is different from the PCX 160. Even though the roller has a different shape, the weight is still the same, 19 grams," said Reza.Also Read: Has 3 Driving Modes, Mileage Yamaha E01 Translucent 104 KmOn the Honda Vario 160, the front drive pulley has an outer diameter of 124 mm and the rear pulley is 155 mm.Meanwhile, the drive belt component has a length of 266.3 mm and a width of 22.4 mm.Meanwhile, the weight of the roller is 19 grams.On the other hand, the outer diameter of the front pulley of the Honda PCX 160 is 127 mm and the rear pulley is 163 mm.The length and width of the drive belt are 286.2 mm and 23.1 mm, respectively.The weight of the roller is similar to the Vario 160, which is 19 grams.Copyright © 2015 authorider.com.All Rights Reserved